Specifications:
Wingspan: 77"
Wing Area: 1050 sq. in.
Ready-to-fly weight: 9.5-10.5 lbs.
Length: 75"
Power: 140-180 Glow

3P Model is proud to release our first 2-meter "Artistic Freestyle" Pattern Plane ARF, the "Rock-n-Roll".  So, what is Artistic Freestyle?  Artistic Freestyle, in the pattern community, is very similar to IMAC 3D Aircraft.   The Rock-n-Roll construction is based on the success of the Icepoint and our 29% Giles 202.  The Rock-n-Roll features two-piece wings and stabs, a traditional firewall structure to accept the popular Hyde engine mount or equivalent, a molded one-piece canopy / hatch assembly, and a pre-mounted two-piece fiberglass cowl. 

Whether you are a pattern flyer, an everyday sport flyer, or a 3D flyer, the Rock-n-Roll is the right choice for you.  The Rock-n-Roll provides a cost effective alternative to the more expensive competition and artistic freestyle type designs.

The Rock-n-Roll is very light providing excellent stability, precision, and 3D flight.  Knife edge flight is excellent with very little (if any) coupling required.  The control surfaces are large and double beveled, providing for plenty of control throw.  To best describe the flight performance of the Rock-n-Roll, it flies like a giant 3D Quest!

We tested this model with a YS 1.40 which provided excellent and unlimited vertical performance.  This plane is feature packed.  View the features below.

Features:

• Construction:  Precision laser-cut balsa & plywood construction.
• Wings:  Wing & stabilizer are built-up 2-piece designs.  Removable stabilizers.
• Wing Spars:  Carbon fiber wing and stabilizer tubes / joiners.
• Incidence:  Factory pre-set.  Can be made to be adjustable.
• Control Surfaces:  3D Control surface area, double beveled.
• Covering:  Factory applied Oracover covering.  Vinyl graphics also included.
• Cowl:  Precision color matched pre-painted fiberglass - Two Piece.
• Wheel Pants:  Precision color matched pre-painted fiberglass.
• Canopy / Hatch:  Pre-formed & pre-painted.
• Landing Gear:  Carbon composite one-piece gear.  Pre-painted.  .
• Servos:  One per Aileron / One per Elevator / One Pull-Pull Rudder / One Throttle.
• Hinge Slots:  Pre-drilled for "Robart" style hinge points.
• Tuned Pipe:  Pre-built tuned pipe / muffler tunnel.
• Building Time:  9 - 12 hours.

Includes:
Pre-built and covered wings, tail assemblies, and fuselage.  All necessary hardware including pushrods, landing gear, wheels, servo tray, Carbon Fiber Wing and Stab tubes, and a photo illustrated instruction manual.

Requires:

• Engine:  140 - 180 Glow engine.
• Muffler:  Tuned Pipes are suggested; however a stock muffler could be used.
• Radio:  Minimum (4) channel radio.  (Computer radio recommended)
• Servos:  (5) High Torque - 90 oz. in. of torque - minimum.  We recommend the use of metal gear servos.  A higher torque servo may be desired for the Pull / Pull system.  (1) standard servo for the engine. 
• Spinner:  3" 
• Misc. Items:  Glow Plug, foam Padding, Fuel tubing, fuel filter, propeller, building and field equipment.

Flying Videos: