|
|
|
| Katana EX ARF |
 |
Specifications:
Wingspan: 75"
Wing Area: 1025 sq. in.
Ready-to-fly weight: 9.5-10.5 lbs.
Length: 66"
Power: 140-180 Glow - Up to 40cc Gas
|
|
|
|
|
The Katana Xtreme design is part of our "UL" - Ultra-Lite Series and incorporates
our "State-of-the-Arf - Revolutionary" construction techniques as seen in today's
"High-End" competition designs which are now available in economical, traditional,
"built-up" balsa and ply construction.
The Katana Xtreme is very light providing excellent stability, precision, and 3D flight. The control surfaces are large and double beveled, providing for plenty
of control throw.
|
|
Photo Gallery: |
|
|
|
Parts: |
|
|
- Construction: Precision laser-cut balsa & plywood construction.
- Wings: Wing & stabilizer are built-up 2-piece designs.
Removable stabilizers.
- Wing Spars: Carbon fiber wing and stabilizer tubes / joiners.
- Incidence: Factory pre-set.
- Multi Wing Position: Adjustable "Floating" wing positioning.
- Control Surfaces: 3D Control surface area, double beveled.
- Covering: Factory applied Oracover covering. Vinyl graphics
also included.
- Cowl: Precision color matched pre-painted fiberglass.
- Wheel Pants: Precision color matched pre-painted fiberglass.
- Canopy / Hatch: Pre-formed & pre-painted.
- Landing Gear: Carbon tube with covered airfoil shaped fairings.
Triple bearing supported in the fuselage.
- Servos: One per Aileron / One per Elevator / One Pull-Pull Rudder
/ One Throttle.
- Hinge Slots: Pre-drilled for "Robart" style hinge points.
- Tuned Pipe: Pre-built tuned pipe / muffler tunnel.
- Building Time: 9 - 12 hours.
|
|
Includes: |
Pre-built and covered wings, tail assemblies, and fuselage. All necessary
hardware including pushrods, landing gear, wheels, servo tray, Carbon Fiber Wing and Stab tubes, and
a photo illustrated instruction manual.
|
|
Requires: |
-
Engine: 140 - 180 Glow engine or up to 40cc Gas
-
Muffler: Tuned Pipes are suggested; however a stock muffler could
be used.
-
Radio: Minimum (4) channel radio. (Computer radio recommended)
- Servos: (5) High Torque - 90 oz. in. of torque - minimum.
We recommend the use of metal gear servos. A higher torque servo may be desired
for the Pull / Pull system. (1) standard servo for the engine. The control surfaces are very
large and deflect over 45 degrees. A lot of power is required to prevent flutter
and provide excellent holding power and full deflection.
-
Spinner: 3 1/2"
-
Misc. Items: Glow Plug, foam Padding, Fuel tubing, fuel filter,
propeller, building and field equipment.
|
| More Airplanes: |
|
|
|
|
|