|
|
|
| Scale-Masters Series 91" Mitsubishi A6M-5
Zero ARF |
 |
Specifications:
Wingspan: 91"
Wing Area: 1450 sq. in.
Ready-to-fly weight: 25 – 32 lbs.
Length: 83” |
|
|
|
|
Attention all warbird enthusiasts: The Mitsubishi A6M-5 Zero was
designed for you! The Zero was selected as our first release of the all new
RC “Scale-Master Series” aircraft. Our “Scale-Master Series” stands for the highest
level of quality, with the highest level of completion, before arriving to you,
the customer.
The “Scale-Master Series” incorporates “State-of-the-Art ” construction techniques
as seen in our successful 3D line of airplanes. These techniques incorporate modern
composite technologies as well as advanced “built-up” balsa and ply construction
techniques utilizing laser cutting and CNC machining equipment. Factory applied
Solortex covering which is professionally hand air-brushed, scale and painted finish.
Scale insignias are pre-painted into the finish.
There will be limited production and availability of the “Scale-Master Series” line
of aircraft due to the level of complexity and detail in construction.
We tested this model with a Desert Aircraft DA-50 gasoline engine. The DA-50 proved
to be an excellent combination for the Zero. We
also used a Zenoah G-62 and a 3W-75.
|
|
Photo Gallery: |
|
|
|
Parts: |
|
|
Construction:Wings & Stabilizer - "Laser-cut" balsa & plywood construction.
Fuselage - Fiberglass composite technology.
Wings: "One-Piece" design with retractable landing gear construction. (Retractable
landing gear not included) Stabilizer: Built-up 2 piece design.
Removable stabilizers.
Wing Spars: Composite laminated maple main spar and aluminum stabilizer tube.
Incidence: Factory Pre-set.
Control Surfaces: Scale with Split-flaps.
Covering: Factory applied Solortex covering. Professionally hand air-brushed, scale,
painted finish. Scale insignias are pre-painted into the finish.
Cowl: Precision matched pre-painted fiberglass.
Canopy: Pre-formed & pre-painted.
Landing Gear: Designed
to accept Robart 154 main gear and 160 or 160WC tail gear.
Servos: Dual Aileron / Dual Elevator / Dual Flap / Single Rudder, Throttle, and
Gear.
Building Time: Approximately 20 hours depending on the level of detail.
IMAA LEGAL |
|
Includes: |
| Pre-built & covered wings, tail assemblies, and fiberglass composite fuselage. All necessary assembly
hardware including servo trays, wing joiners, and
a photo illustrated instruction manual. |
|
Requires: |
Engine: 50cc - 100cc gasoline engine or equivalent.
Muffler: Inverted Pitts Style suggested..
Radio: Minimum (6) channel radio. (Computer radio recommended)
Servos: (7) 60 ounce (minimum)- servos for the control surfaces. A higher torque servo may be desired
for the rudder system. (2) standard for the engine and retracts..
Spinner: 3"
Misc. Items: Retractable landing gear and air kit, control surface hardware, 1/2"
foam rubber padding, fuel tank, large fuel tubing, fuel filter,
propeller, spinner,
building & field equipment.
|
| More Airplanes: |
|
|
|
|
|